Short answer: to check a USDT TRC-20 transfer on TronScan, paste the transaction hash (TXID) into the search box at tronscan.org. The page tells you three things: whether it worked (Result: SUCCESS and Confirmed), what moved (the Tether USD (USDT) amount, sender and receiver), and what it cost (energy and bandwidth used, and how much TRX was burned to pay for them). A normal USDT transfer uses about 64,285 energy, or about 130,285 to an address that has never held USDT (as of November 2026).
Key takeaways
- The TXID page is the receipt. If it says SUCCESS and Confirmed, the USDT has arrived, whatever a wallet app shows.
- Check the token contract: real USDT on TRON is
TR7NHqjeKQxGTCi8q8ZY4pL8otSzgjLj6t. - The fee section splits energy into energy you already had (staked or rented) and energy paid by burning TRX at 100 sun per unit (as of November 2026).
- Every TRX burned for energy is money you could have saved. Renting energy before the transfer can cut that cost by up to 80%.
How do I find a USDT transaction on TronScan?
- Get the TXID. It's a 64-character hex string. In TronLink, Trust Wallet and most wallets, open the transfer in your history and copy the hash or tap "View on explorer". An exchange shows it in the withdrawal details. No hash means the transfer was never broadcast.
- Open TronScan yourself. Type
tronscan.orginto the address bar rather than clicking a link someone sent you; fake explorer sites exist. - Paste the hash into the search box. You land on the transaction page. You can also paste a wallet address and open its Transfers tab to see every USDT movement for that address.
Can't find it at all? See how long a TRON transfer takes; a confirmed TRON transaction is visible on the explorer within seconds.
What does each field on the transaction page mean?
TronScan's labels change a little between versions, but every USDT transfer page has the same blocks:
| Field | What it tells you | What to look for |
|---|---|---|
| Result | Whether the contract call worked | SUCCESS. FAILED or OUT_OF_ENERGY means no USDT moved, but the fee was still charged |
| Status | Whether the block is final | Confirmed after about 1 minute (19 blocks). Unconfirmed just means wait |
| Block and time | When it was included | Time is shown in your local time zone or UTC; check which |
| Owner address / Contract address | Who signed it, and which contract was called | The contract must be TR7NHqjeKQxGTCi8q8ZY4pL8otSzgjLj6t |
| Token transfer (From, To, Amount) | The actual USDT movement | The receiver matches the address you meant, and the amount is right |
| Resources consumed and fee | Energy and bandwidth used, and TRX burned | See the next section |
| Fee limit | The most TRX the sender allowed the call to burn | Too low a limit is a classic cause of OUT_OF_ENERGY |
Note the difference between the owner address and the contract address. A USDT transfer is a call to the USDT smart contract, so the "contract" field shows Tether's contract, not the recipient. The recipient is in the token transfer line. If the contract is anything else, the token is a copy; see how to verify the USDT TRC-20 contract address.
How do I see the fee I paid for a USDT transfer?
Look at the resources section. A USDT transfer uses two resources:
- Bandwidth pays for the transaction's size, about 345 bandwidth for a USDT transfer. Every activated account gets 600 free bandwidth a day. If that's used up and you have no staked bandwidth, TRON burns 1,000 sun per unit, so 0.345 TRX (as of November 2026).
- Energy pays for running the contract code. TronScan shows how much came from energy you held (from your own stake or energy delegated to you) and how much was paid by burning TRX at 100 sun per energy (as of November 2026).
Here are two real USDT transfers we read from the chain on 16 November 2026:
| Receipt line | Transfer A (receiver already held USDT) | Transfer B (receiver never held USDT) |
|---|---|---|
| Energy used in total | 64,285 | 130,285 |
| Energy from stake or delegation | 64,285 | 129,539 |
| Energy paid by burning TRX | 0 (0 TRX) | 746 (0.0746 TRX) |
| Bandwidth | 345 (0.345 TRX burned) | 345 (0.345 TRX burned) |
| Total TRX burned | 0.345 TRX | 0.4196 TRX |
Both senders had energy ready, so they paid almost nothing. A sender with no energy pays for all of it: 64,285 × 100 sun ≈ 6.43 TRX, or about 13.03 TRX for 130,285 energy, plus bandwidth (as of November 2026). Why the second number is double is explained in how much TRX you need to send USDT.
If you read transactions through an API instead of the web page, the same numbers come from TronGrid's gettransactioninfobyid: receipt.energy_usage_total (all energy), receipt.energy_usage (from your own resources), receipt.energy_fee and receipt.net_fee (sun burned for energy and bandwidth), and fee (total sun burned).
How do I check my energy and bandwidth on TronScan?
- Paste your own wallet address into TronScan.
- On the account page, find the resource panel. It shows your available energy and bandwidth and how much of each you've used.
- Open the staking or resources tab to see where the energy comes from: TRX you staked yourself, or energy another address delegated to you, with the delegator and amount.
Before a USDT transfer you want at least about 65,000 energy available (about 131,000 if the receiver has never held USDT). Anything less, and the network burns TRX for the rest. If you're not sure which case applies, the TronSave Address Checker tells you whether a receiving address is activated and already holds USDT; see how to check a TRON address before sending USDT.
What does a failed USDT transfer look like on TronScan?
A failed transfer still has a page, with Result showing FAILED, often with OUT_OF_ENERGY or REVERT. No USDT moved: the token transfer line is missing or empty, and the balance stays with the sender. But the energy and bandwidth used up to the failure were still charged, so TRX can be gone. The usual causes are too little energy combined with a low fee limit, or a frozen or blacklisted sender. The failed TRON transaction guide goes through each error and its fix.
How to use TronScan to check what TronSave saved you
TronScan is also the easiest way to audit your own fees. Open a few of your past USDT transfers and add up the TRX burned for energy. That is the cost renting energy replaces. To compare it with rental prices, paste the numbers into the TronSave energy calculator; the burn vs rent calculator guide explains each field.
When you rent energy on TronSave, the energy is delegated to your address on-chain. You can watch it arrive on TronScan:
- Place an order on the TronSave Market or with ZapBuy for about 65,000 energy (131,000 for a new receiver).
- Open your address on TronScan. Your available energy goes up, and the delegation shows the provider's address as the delegator.
- Send the USDT, then open the new TXID. The energy line should show the energy covered by delegation and 0 TRX, or close to it, burned for energy.
For how delegation works behind the scenes, read how to delegate energy on TRON.
FAQ
TronScan says SUCCESS but the USDT isn't in my wallet. What now?
The transfer worked; the wallet app isn't showing it. Check the receiving address matches yours and add USDT by its contract address. The USDT not showing guide covers every case.
Why did my USDT transfer burn TRX when I had some energy?
Because you had less than the transfer needed. TronScan's resource line shows the split: what your energy covered, and what was burned. Transfer B above had 129,539 energy and still burned TRX for the last 746.
Why does a USDT transfer use 64,285 energy?
Part of it is the code itself and part is a surcharge TRON's dynamic energy model adds to very busy contracts. The chain reported the surcharge as 49,635 of the 64,285 in Transfer A. The total is what you pay for.
Can I check a USDT TRC-20 transaction without TronScan?
Yes. Other TRON explorers and TronGrid's API read the same chain. TronScan is just the most widely used, and the one most wallets link to.
Is it safe to paste my address into TronScan?
Yes. A blockchain explorer only reads public data. It never needs your private key or seed phrase, and no page on the real tronscan.org asks for them. Anyone who does is a scammer.
The example receipts were read from TronGrid (gettransactioninfobyid) on 16 November 2026. Energy figures use the 100 sun energy price and bandwidth the 1,000 sun price as of November 2026; check current values before large transfers. This guide is for information only and is not financial advice.
