Short answer: the TRON Nile testnet is a free copy of the TRON network for testing. Its tokens have no value, so you can try transfers, smart contracts and energy rental without spending real TRX. Add Nile to TronLink, enter your address at the Nile faucet, and you get 1,000 test TRX and 1,000 test USDT (faucet amounts as of November 2026). You can see every transaction on nile.tronscan.org. If you build on TronSave, the whole API also runs on Nile at https://api-dev.tronsave.io, so you can test buying energy before you use real money.
Key takeaways
- Nile and Shasta are TRON's two public testnets. Nile usually runs ahead of Mainnet, so new features and parameter changes show up there first. TronSave's testnet supports only Nile.
- The Nile faucet gives test TRX and test TRC-20 tokens, including test USDT at contract
TXYZopYRdj2D9XRtbG411XZZ3kM5VkAeBf. You only need an address. - On Nile, energy also costs 100 sun when it is burned (chain parameter checked in November 2026), so fee logic you test there carries over to Mainnet.
- TronSave testnet: website
testnet.tronsave.io, APIapi-dev.tronsave.io, MCPmcp.tronsave.io/testnet/mcp. Testnet keys, balances and orders are separate from Mainnet.
What is the TRON Nile testnet?
A testnet is a separate blockchain that runs the same software as Mainnet, but its coins are free and worthless. TRON runs two public testnets. The TRON developer documentation calls Nile a "forward-looking" testnet: its code is usually a version ahead of Mainnet, so it is where new features and governance changes appear first. Shasta is the older testnet. Many tutorials use it, but it no longer accepts new node operators.
| Item | Nile testnet | Shasta testnet |
|---|---|---|
| HTTP API | https://nile.trongrid.io (also https://api.nileex.io) | https://api.shasta.trongrid.io |
| JSON-RPC | https://nile.trongrid.io/jsonrpc | https://api.shasta.trongrid.io/jsonrpc |
| gRPC (full / solidity) | grpc.nile.trongrid.io:50051 / :50061 | grpc.shasta.trongrid.io:50051 / :50052 |
| Explorer | nile.tronscan.org | shasta.tronscan.org |
| Faucet | nileex.io/join/getJoinPage (TRX + test tokens) | Linked from trongrid.io/shasta |
| Code version | Usually ahead of Mainnet | Can differ from Mainnet |
| TronSave testnet | Yes | No |
Endpoints are from the TRON developer docs, as of November 2026. All RPC options, including Mainnet endpoints, are in our TRON network RPC URL guide.
How do you add the Nile testnet to TronLink?
- Open the TronLink browser extension and unlock it.
- Click the network name at the top (it shows "Mainnet") and choose Nile Testnet. TronLink includes Nile, so you don't need to type an RPC URL.
- Your address stays the same. The same
T…address exists on every TRON network, but each network has its own balances. - To go back, switch the network to Mainnet. Before you sign anything with real funds, check which network is selected.
Tip: create a separate test account in TronLink for testnet work. Never import a seed phrase that holds real money into a script or tool you are still testing.
How do you get free test TRX and test USDT from the Nile faucet?
- Copy your TRON address from TronLink.
- Open nileex.io/join/getJoinPage.
- In the test coin section, paste your address and click Obtain to receive 1,000 test TRX.
- In the USDT section, paste the address again to receive 1,000 test USDT. Other test tokens include BTT, JST, WIN, USDJ and a TRC-10 token. Amounts are as of November 2026.
- Check the balance on
nile.tronscan.org. To see test USDT in TronLink, add the token with contractTXYZopYRdj2D9XRtbG411XZZ3kM5VkAeBf.
The faucet doesn't publish a daily limit. If it refuses a request, wait and try again later. Don't create many addresses just to collect more. 1,000 test TRX is enough for hundreds of test transactions.
Nile USDT contract address: TXYZopYRdj2D9XRtbG411XZZ3kM5VkAeBf (symbol USDT, checked on nile.trongrid.io in November 2026). It is not the Mainnet USDT contract. Never hard-code a testnet address into production code.
How do you test TRON energy rental on Nile with TronSave?
TronSave runs a full copy of its energy market on Nile. Only the domain changes: https://api-dev.tronsave.io instead of https://api.tronsave.io. Every path and parameter stays the same. That lets you test the whole flow risk-free: get a quote, buy energy, have it delegated, and send a USDT transfer that uses the rented energy instead of burning TRX.
- Get a testnet API key. Switch TronLink to Nile, open
testnet.tronsave.io, connect the wallet, then go to Account Info → Login TronSave. Copy the API key and your deposit address. A Mainnet key is rejected withINVALID_API_KEYon the testnet host. - Fund the internal account by sending test TRX from the faucet to the deposit address shown there. On Mainnet the minimum deposit is 10 TRX; use the minimum the testnet site shows.
- Get a quote (no key needed):
curl -X POST https://api-dev.tronsave.io/v2/estimate-buy-resource \
-H "Content-Type: application/json" \
-d '{
"receiver": "TYourNileAddress",
"resourceType": "ENERGY",
"resourceAmount": 65000,
"durationSec": 900,
"unitPrice": "MEDIUM"
}'
- Buy the energy with the same body sent to
/v2/buy-resource, plus the headerapikey: YOUR_NILE_KEY. Check your balance withGET /v2/user-info. - Check the delegation. Open the receiver on
nile.tronscan.org. The rented energy appears under its resources, usually within seconds. - Send a test USDT transfer from that address. The transaction page should show energy used from the delegation, and little or no TRX burned for energy.
The full request and response format, order options and error codes are in the TronSave API v2 guide. Ready-made clients are in the TronSave SDK guide (set network: "testnet") and the Python example. If you work with an AI assistant, connect the testnet MCP server (https://mcp.tronsave.io/testnet/mcp with an API key, or https://mcp.tronsave.io/oauth/testnet/mcp with a Nile wallet). You can then ask it for quotes and test orders in plain language; see the TronSave MCP server guide.
Do Nile fees match Mainnet?
The prices are the same, but energy use per transfer may differ. On Nile the chain parameters for energy (100 sun per unit) and bandwidth (1,000 sun per byte) matched Mainnet in November 2026. On Mainnet, a USDT transfer needs about 64,285 energy (≈6.4 TRX if burned) to an address that already holds USDT. To an address that has never held USDT it needs about 130,285 energy (≈13 TRX). The Nile test USDT is a different contract, though, so its energy per transfer can differ. Read the actual energy used on the Nile transaction page before you set your order sizes, and re-check them on Mainnet. Renting energy instead of burning TRX can cut the Mainnet fee by up to 80%. Nile is where you confirm your code does that correctly.
Common Nile testnet problems
- Balance is 0 after using the faucet: TronLink is still on Mainnet, or you are looking at the Mainnet TronScan instead of nile.tronscan.org.
- "Account does not exist": a new address must receive test TRX first. Receiving only a token does not activate a TRON address.
- Transaction fails with OUT_OF_ENERGY: the address had too little energy and TRX to cover the contract call. Get more test TRX or rent test energy first. Our failed transaction guide lists the other causes.
- TronSave returns INVALID_API_KEY: you used a Mainnet key against
api-dev.tronsave.io, or the other way round. - Code works on Shasta but not with TronSave: TronSave's testnet is Nile only. Move your test wallet and contracts to Nile.
FAQ
Is TRON Nile testnet TRX worth anything?
No. Nile TRX and Nile USDT have no value and cannot be moved to Mainnet or sold. Anyone who offers to buy or sell testnet coins is running a scam.
Which TRON testnet should I use, Nile or Shasta?
Use Nile if you want to test upcoming TRON features or the TronSave API, MCP or SDK. Shasta works for basic tutorials, but TronSave does not support it.
What is the Nile testnet explorer?
It is https://nile.tronscan.org. It works like TronScan: search an address, transaction hash or contract to see balances, resources and energy used.
Can I use MetaMask with the TRON Nile testnet?
Nile has a JSON-RPC endpoint (https://nile.trongrid.io/jsonrpc) for Ethereum-style reads. TRON transactions and TRC-20 transfers are normally signed with a TRON wallet such as TronLink, so use TronLink for this guide's steps.
Do I need a TronGrid API key for Nile?
For light testing, the public Nile endpoint works without a key. For heavier traffic, see our TRON API key guide, and check TronGrid's current rules.

